Garage Door Repair Tips & Tricks


As you come home from work, you press the button to open your garage door. Oh, nothing happens? You press it again, but still, it does not raise. There, certainly, is a problem.

Garage doors are meant to keep your car and garage accessories secure. A problem with locking or unlocking presents serious concerns. You must be thinking of calling a professional, but maybe you can repair the issue yourself?

There are a handful of tips and tricks to try to fix your garage door. We have mentioned a few here to help you with a garage door repair. A little effort can help you save a lot of time and money.

Here you go!

1.    Check the Sensor

Most of the time, the sensor is the common reason behind your garage door maintenance , not raising or going down. Maybe, all you have to do is replace your sensor. However, it is better to change its position and try operating it first. Place it somewhere lower and press the button. Make sure no objects come in the way of the remote and sensor. Sometimes, the sensor does not work because of the object/s blocking it.

If the sensor still does not work, it requires replacement.

2.    Look if the Batteries are Dead

If you cannot open or close your garage door, there can be simply an issue with the remote instead of the door itself. Here, all you have to do is change the batteries. There’s no easier repair than changing the batteries.

However, if changing batteries does not work, there is potentially some electrical or mechanical issue. If you are mechanically inclined, you can find it out in no time.

3.    Adjust the Knob and Force Setting

Sometimes, adjustment fixes all the problems. There is a knob at the top of the garage door problems that allows you to set the adjustment. Turn it in the clockwise direction at a slow pace. Keep checking its working until it operates the way it should.

Thus, a little increase in force setting settles all the problems, and your garage door goes back to the right working condition.

4.    Check the Motor Running

At times, the motor does not run at all, while at other times, it does not stop running.

In the first case, a little lubrication goes a long way. But in the other case, you need to have a look at the limit switch. Set it adjustment either to track or to rear. Then, check it again to know if it’s fixed.

Ensuring the proper running of the motor makes your garage door work properly.

5.    Lubricate the Mechanical Parts

Over time, the grease sets over all the garage doors’ mechanical parts, especially nuts and bolts. It is best to lubricate your garage door from time to time. It helps ensure the right placement of all the mechanical parts and great working conditions.

Regular maintenance prevents a lot of locking/unlocking problems and large repair costs.

6.    Clean it with a House Cleaner

Regular cleaning is also a part of maintenance. You can use a conc. house cleaner to clean your garage door. This keeps all the grease and dirt away, keeping the tracks smooth and unjammed.

7.    Check the Springs

Springs are another significant cause behind the ill-functioning of garage doors. To check if there is a problem with springs, you need to unplug the electricity. As you do so, see if it is hard to open or shut the door manually.

If yes, you need to replace the springs for smooth functioning.

8.    Look Out for the Power Outage

If the door does not raise when you press the button, there’s likely a power outage. If you have been facing this problem recently, it will quickly click your mind.

Before you plan on taking a bus, look for that cord hanging down with the red handle. As you pull it, you can raise and lower the door manually. However, it might take a little extra manpower.

9.    Check if the Door Has Frozen

This usually happens in cold and frost. Doors and handles become stiff due to the freezing temperature. When the mechanism stiffens, power can go out. If you installed your garage door in the last 10 to 15 years, it will most likely come with pressure adjustment for opening and closing the door.

You can look into the settings and change them as per the weather to keep your door raise and lower smoothly.

10.                       Equip Sagging Doors with Tension Rods

Over time, doors become saggy. This is mainly the case with wooden doors. As they age and become more susceptible to gravity, it gets difficult to open and shut them.

Well, garage doors usually come with tension rods at the door back. You can use these tension rods to square your door up. These rods are in a diagonal setting, attached to the bottom and top opposite corners of the door. To straighten the door, all you have to is tighten the turnbuckle.

Make sure you tighten it a little so that the door can easily adjust. It helps improve functioning by large.

11.                       Lock Your Garage Door Manually

Well, if the automatic mechanism isn’t working, you can lock your garage door manually. Most doors come with two horizontal bars positioned in the middle of the door and lock into slots placed on each side. This locks your door manually from the inside.

However, it is important to note here that these bars can dealign with their position with time. To lock them in place, you need to correct the alignment. For that, unscrew guide brackets of the door and reposition them.

It helps fit the bars into respective slots securely. Lubricate the slots, and you are good to go!

Verdict

There are a number of little fixes that you can make yourself without professional assistance. But if you have tried all the simple tricks and nothing works, it is best to call a professional before the problem gets more complex.